Using the latest wireless protocols and fully integrating with existing HVAC devices a truly plug and play solution is now possible. All devices can easily be integrated with any buildings current controls with minimum fuss or disruption. Reduce your energy consumption by up to 28%
nanoBEMS sits alongside your sites existing Building Energy Management system or can replace in its entirety. For complete monitoring of all building areas such as Temperature, Humidity, Light Level, System Faults, Intruder even Fire systems. For the best results the system is ideally suited for what is known as control circuit interception. All control devices are configured to fail safe to allow for the previous system control, if required. All devices can be simply switched off in case of any problem after installation. This allows our remote team to fault find without any major impact to the building occupants or comfort levels. Control your Boilers, Chillers, Air conditioning, Air Handling units....any system is possible!
Fire and Intruder
how it works
There are many different control systems on the market, But our’s is unique. Here is how it works. Quick to deploy and instant savings. The options are limitless with short payback times on investment. Some devices can be installed in as little as four hours. Using the latest IOT-WAN technology we're doing it differently*
Your own engineers can connect the nanoBEMS Sensor or our own engineers can carry this out for you. Devices are pre-configured based on your own requirements for true plug and play solutions.
Once your device is installed we can then activate this over the long range secure network to ensure all settings are optimised and achieveing the target savings projected within your building
The nanoBEMS sensors and control modules are seamlessly left to operate alongside you existing systems and in cases where the smart sensors monitor Gas, Electric or water the savings are instantly visualised through your portal.
Any product is only as good as it measured performance for energy savings and critical alarm monitoring. The nanoBEMS Smart sensors and modules will allow new levels of low cost solutions against the investment price within your building.
nanoBEMS sensors and control devices can be fitted in as short a time as fifteen minutes and instantly operational
Monitors Building Health
Devices can monitor critical systems such as Chillers, Boilers, Server Rooms, Leak Detection, Fire, Security or temperature.
All equipment is securely protected with the latest communication encyption protocols.
The monitoring and control can be used anywhere, on any system. It's as complicated or as simple as you make it.
Save on your bills
Primary benefits to save on Gas, Electric and water usage. Boilers, Domestic hot water and Air conditioning easily adapted
Our systems are compatible with many buildings and primarily adds inteligence through the tridium Niagara platform
Fast and secure
Encrypted communications with access keys easily monitored with full access or no access at short notice
Boilers, Chillers, Server rooms, Air-conditioning units, Fire systems, Intruder systems with many other options available
Visualise your data
Energy Dashboards, Heating and ventilation graphics, graphs and automated reports on your buildings or systems
Constantly monitored connections for critical systems and HVAC plant monitoring
Designed for you
Easy end user managment to allow access to data or alerts via email, Text or voice call keeping you informed
nanoBEMS can report on potential faults prior to an emergency problem developing stopping any potential closures or lost production
in the "always on world" ensuring you know the right information at the right time is crucial. Not only does this allow for better descision making it can prevent potentialy costly shutdowns or historic probems in their tracks. You can use the product for any asset you wish below are some examples.
Boiler and heating equipment
Heating within schools, hospitals and care homes is essential. See how nanoBEMS can not only reduce gas use but monitor your systems to keep the heat constant to these environments
You can't manage what you dont measure. Without essential services monitoring the information needed to make informed decisions isn't possible. With nanoBEMS the logging possibilities for the lowest costs make the decision easy.
Full electrical meter logging (pulse and modbus)
General heat meters (Chilled and Heat)
District Heat systems full monitoring and saving
Gas supply monitoring and metering
Water use and added leak detection
Energy Dashboard and visualisation
Any System, Anytime, Anywhere!
You won’t just receive messages, alerts and email when it matters, You’ll get insites to how your systems or servies are actually performing . No crunching numbers in a spreadsheet or a database just answers that are available. Through modern day analytics any combination of data verification is possible. Once the rules and reports are defined the system will automaticlly carry these out saving you time and money.
NEW GENERATION TECHNOLOGY
Equipment and devices have evolved rapidly over the last twelve months to a point now the systems are fully ready to deploy. With any emerging systems the testing and problems that can occur can be many. These issues are then resolved and a better product is born through testing and more importantly results. We have chosen the most robust and reliable devices for field deployment to ensure accuracy and confidence from our customers. In the modern day monitoring very little cannot be achieved in terms of achievng your requirements.
We work with a wide range of clients from facilites maintenance to major construction firms. All of our clients are given the most adaptable future proof solutions. We have no external influences that will make us promote any given system just honest solutions right for you.
Ingen’s goal is to build a strong and successful business by delivering great service through great people.
NATS is the UK's leading provider of air traffic control services. Each year we handle 2.4 million flights and 250 million passengers in UK airspace
NHS stands for the National Health Service, which provides healthcare for all UK citizens based on their need for healthcare rather than their ability to pay for it.
Got questions? We’ve got answers. If you have some other questions, feel free to send us an email to email@example.com
What is nanoBEMS? How does it work?
A low cost monitoring and control solution based on the newly emerging Building Internet of things. Quick and easy to deploy which deos not rely on the conventional Wifi, Ethernet building connections or the existing IT department. All devices are plug and play where in most cases the companies own engineers or staff can fit maximising cost savings. The devices can monitor many types of Electrical, Gas or water meters but more importantly many other systems within any type of building. Once the device is installed the data is then collected, analysed and then presented to you in many ways. Ultimatley the system has been designed to drastically reduce require manpower and to make sense or solve the energy issue you may be facing. The added advantge is the nano system can fully monitor all your critical systems ensuring your building runs within all the normal levels of comfort your occupants are acustomed to.
Why do i even need this system and service?
The monitor, target and reduce energy with the added benefit of new insites, to improve your operations and financial spend on smart services. Reduce man hours carrying out maintenance and plant checks that these sensor can fully automate
Do i need to involve my IT Department?
No! with this system there is no red tape, IT issues or conflicts which hinder the installtion of many other systems. The system communicates with a new secure technology that cannot be affected by the building services such as power failure or user error. For once the entire package can be delivered and fully operational with the minimum amount of fuss and cost.
What is the cost of the system compared to others?
in most cases this system is supplied, fitted and fully operational at half the cost of many other systems on the market. Savings are then further possible by reducing tasks by staff and freeing valubale man hours better spent within your own organisation. From manually collecting meter readings to resetting a boiler which has tripped nanoBEMS has hundreds of applications designed to save our end users money.
the technical bit!
Need more info? Please have a look at the tech specs of the nanoBEMS. We’ve used Latest technology & quality materials
iPhone iOS 7 & up
Android 4.3 & upt
Energy Dashboards and alerts
Notification for calls / texts from any equipment
Bluetooth ready (iBeacon / eddystone)
Realtime data direct to your Smart phone
Set temperatures alerts within your building
Analyze history and data from services
Sync to phone & cloud
Connect to other BEMS systems and meters
Connect to energy reporting systems
over the air firmware upgrades
Critical equipment alerts
Comm room monitoring
HVAC Plant monitoring
Generator and electrcial monitoring
IOT as Standard
Fully IOT ready for site deployment
All latest secuirty protocols
Standard AAA 6 - 24 months
Dependant on type of monitoring required
Solar Power available as a upgrade
Motion and light levels
Any fault contacts
meet the team
We are commited to bringing new and innovative ways to reduce costs and increase energy savings with enhanced monitoring. We ould love to hear your feedback or suggestions if you have any requirements not covered, we like a challenge!
Founder and Director
Founder and Director
Sales and Support
Customer Billing and Subscriptions
Parts and Shipping
Mobile Acess for nanoBEMS
Your connected systems can be easily checked if required through any smart phone, Tablet or PC connected to the internet. All access is secured. For further information on how to access your system please contact us for further details.
Subscribe to our product newsletter to get notified when we update the product or when we feel you should know more about further developments
get in touch
Environmental Energy Controls, Unit 6B Nasmyth Court, Houston Industrial estate, Livingston, EH54 5EG